Ultra High Power LED modules with TEC cooling and optional fibre-coupling
LEDMOD HP Series
TEC-cooled Ultra High Power LED modules from 365 nm to 700 nm with optional fibre- / Liquid Light Guide coupling
Key Facts:
• Wavelengths between 365nm and 660nm + white available
• High spectral- and power stability due to TEC temp. control of the LED chip
• Fibre and Liquid Light Guide coupling
• Fast analogue and digital modulation up to 500kHz (<2µs switching time)
• Internal, programmable PWM frequency generator up to 200kHz
• SYNC output
• USB2.0 and RS-232 interface
• Drivers for Metamorph, LabVIEW and Micromanager available
|
LEDMOD HP Series - Specifications |
|
|
LEDMOD HP |
|
|
Wavelengths & Powers |
UV / Violett: |
|
Free emission angle |
120 - 130° |
|
Temperature control |
active peltier cooling (TEC) |
|
External modulation capabilities |
up to 500kHz analogue modulation |
|
Modulation inputs |
1x Analogue modulation (0...5V / 2.5kOhm) via SMA Connector |
|
Internal modulation capabilities |
Up to 200kHz with programmable frequency |
|
Power setting resolution |
internal: 12Bit |
|
SYNC output |
TTL signal via SMA connector |
|
Computer interface |
USB-2.0 and RS-232 |
|
Operation modes |
1.) external analogue control (0...5V) for output power and |
|
Control interface |
15-pin HD-Sub-D connector |
|
Dimensions |
82 x 76.5 x 220mm (HxWxL). |
|
Weight |
1500...1700g (depending on type of fibre coupler) |
|
Supply voltage |
11VDC-25VDC |
|
Power consumption |
80W max. |
|
Environmental temperature |
0°C-35°C |
|
Special features |
* Interlock function |
|
Options |
* High-efficiency fibre coupling into high-NA fused-silica fibres or 2/3/5mm Liquid Light Guides |
The LEDMOD HP modules offer great functionality and flexibility for applications in industry and research. With wavelengths from 365 to 660nm and optical output power of up to several watts, the LEDMOD HP series can be used in many power-hungry applications such as microscopy, chemical analysis, spectroscopy, forensics and others. The LED modules are available in a fibre- or liquid light guide coupled version or with free space emission. The modules have modulation inputs for fast analogue intensity modulation with up to 500 kilohertz and digital modulation with a switching time of < 2µs. High-precision temperature stabilization of the LED chips ensures a very good performance and wavelength stability. This is important especially for applications that not only need an exact output power, but also a high stability of the emission spectrum. The digital modulation can be operated via external modulation signals, as well as an internal, programmable signal generator. A SYNC output ensures synchronization with external devices such as cameras, spectrometers and lock-in amplifiers. One or several LEDMOD HP modules can be comfortably controlled via RS-232 and USB 2.0 interface by either the supplied software 'Omicron Control Center' or the customer's own software.
Omicron Control Center (OCC) Software – controlling 3 LEDMOD HP modules
Each LEDMOD HP module is delivered with the Omicron Control Center (OCC) – Control Software. The software can control multiple LEDMOD HP modules and offers a master section which controls all modules in parallel. The OCC can be used for daily use or just for configuring the LEDMODs for computer independent operation once.
Downloads
LEDMOD HP Datasheet
Contact
Omicron-Laserage Laserprodukte GmbH
Raiffeisenstrasse 5e
63110 Rodgau-Dudenhofen
Germany
Tel:
+49-(0)6106-8224-0
Fax:
+49-(0)6106-8224-10
email:
mail@omicron-laser.de