CWA.L.NB – Narrow Bandwidth DFB Diode Lasers

Narrow Bandwidth DFB lasers in the IR wavelength region
Narrow Bandwidth CW laser diode modules using DFB diode technology


Redphoton® CWA.L.NB Series – 760 nm – 1060 nm

Specifications CWA.L.NB-Models

 

Redphoton® CWA.L.NB

Wavelengths & Powers
(other wavelengths and powers on request)

Single-Mode:
760nm / 40mW
763nm / 30mW
773nm / 75mW
780nm / 80mW
785nm / 80mW
852nm / 150mW
937nm / 100mW
976nm / 150mW
1060nm / 150mW

Beam diameter
(other diameters on request)

1.25mm (1/e²) +/- 0.25mm

Beam quality M²

<1.2

Astigmatism (corrected)

<0.2*ZR

Beam ellipticity

<1.1:1

Optical bandwidth

<10 MHz (2 MHz typical)

Coherence length

>20 Meters

Polarisation

>100:1 vertical

Power stability

<0.5% / h

Noise 0Hz-100MHz

<0.5% peak<>peak

Modulation speed

Analog: 100Hz
Digital: 10kHz

Supply voltage

24VDC, 2 Amp.

Features

Safety- interlock
RS-232 Interface
Remote-connector

Options

LDM.COL - collimator objective
LDM.FOC - customized focussing objective
LDM.AAC - Automatic Aging Compensation
LDM.FASY.XXX - fibre coupling unit
LDM.24VPSU - world wide power supply

The DFB diode lasers of the CWA.L.NB Series are highly-stable, temperature-stabilized diode lasers with extremely narrow spectral bandwidth of typically <2 MHz and <0.005 picometer and coherence lengths of up to 250 meters. As a result of their intelligent laser controller with interface RS-232, these lasers can be integrated seamlessly into applications and controller. Through the standardized Command Line Interface (CLI), you have at all times full control of all parameters of the laser, such as e.g. laser diode temperature, laser powers and currents, operating modes and lots more. The high-precision temperature stabilization to a maximum diode temperature variation of <0.02°K, and the stable power source for the laser diode, enable extreme power stability and very low noise levels.
The systems consist of a laser head and a laser controller in the EMC-screened modular housing with supply voltage input 24 V DC, according to industrial standard. The integrated modulation inputs for analog power modulation with up to 1 kHz, and TTL modulation with up to 10 kHz, enable integration into control and measurement processes. As in case of all lasers of the Bluephoton® and Redphoton® series, the laser head can be very simply adapted to customer specifications by the use of the modular principle.

Press Releases

DFB lasers

Contact

Omicron-Laserage Laserprodukte GmbH
Raiffeisenstrasse 5e
63110 Rodgau-Dudenhofen
Germany

Tel:
+49-(0)6106-8224-0
Fax:
+49-(0)6106-8224-10
email:
mail@omicron-laser.de