LaserNest® Desktop Diode Laser Series
LaserNest® high-performance desktop diode lasers
Key Facts:
• Plug & Play desktop-style laser
• >30 different wavelengths between 375nm and 1550nm
• Optical output powers up to 500mW
• Fibre coupled output with SM/PM fibres, MM fibres or Liquid Light Guides
• High-Stability CW operation (constant-current or constant-power mode)
• Fast analogue modulation >3MHz
• Ultrafast digital modulation >250MHz
• Electronic shutter function (laser inhibit) with >500kHz full ON/OFF capability
• Automatic Aging Compensation (AAC) function
• USB2.0 and RS-232 interface
• Optional fail-safe laser safety shutter
• Drivers for Metamorph, LabVIEW and Micromanager available
Wavelengths & Powers |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Light output options |
Single-Mode fibre: SM/PM fibres with FC/PC, FC/APC, FCP8 or collimated output beam Multi-Mode fibre: MM fibres with 50....1500µm core diameter and FC/PC or SMA connectors |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Long term power stability |
<0.5% / 8h |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
RMS Noise 20Hz...20MHz |
<0.2% (CW) |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Operation Modes |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Analogue modulation |
>3MHz |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Digital modulation |
>250MHz |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Laser Enable (electronic shutter) |
>500kHz (full ON/OFF) |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rise- and falltime |
Analogue: < 100ns |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Extinction ratio |
Analogue: > 1000 : 1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Supply voltage |
80-240VAC / 50-60Hz |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Control interface |
RS-232 and USB 2.0 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dimensions |
270 mm x 92 mm x 110mm (l x w x h) (w/o fibre coupler) |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Options & Accessories |
|
Omicron‘s „LaserNest” systems are a combination of the well-established LuxX+ diode lasers and a desktop-style housing. This combination represents an easy to use plug&play laser light source for science, research and industry. The high-performance systems can be equipped with one laser module of wavelengths from UV to the near IR range and offer fast analogue intensity modulation with up to 3MHz and high-speed digital modulation up to 250MHz. Additional electronic shutter function provides full ON/OFF modulation with a switching time of <1µs and frequencies up to 500kHz.
The light output can be either single-mode (polarization-maintaing) fibres, multi-mode fibres or Liquid Light Guides.
The LuxX+ laser modules within the “LaserNest” are available with up to 500 milliwatt of optical output power and more than 30 different wavelengths between 375 and 1550nm. Optional clean-up filters and a fail-safe laser safety shutter can be directly installed in the system to adapt the “LaserNest” systems to the customer’s application and safety requirements. Modulation inputs with software-selectable voltage ranges and impedance ensure easy interfacing to external devices like cameras, microscopes or DAC cards.
The device can be conveniently controlled via the integrated USB-2.0 interface by the included software „Omicron Control Center“ or third party software.
Application examples:
- Flow Cytometry
- Confocal Microscopy
- Widefield Microscopy
- Lightsheet Microscopy (SPIM)
- Frequency-Domain FLIM
- Optogenetics
Each LaserNest diode laser is delivered with the Omicron Control Center (OCC) – Laser Control Software.
The software can control multiple lasers and offers a master section which controls all lasers in parallel. The OCC can be used for daily use or just once for configuring the laser for computer independent operation.
Downloads
Contact
Omicron-Laserage Laserprodukte GmbH
Raiffeisenstrasse 5e
63110 Rodgau-Dudenhofen
Germany
Tel:
+49-(0)6106-8224-0
Fax:
+49-(0)6106-8224-10
email:
mail@omicron-laser.de