You are here:HomeLasersDiode LasersLuxX.HSA Lasers

LuxX.HSA® Diode Laser Series

LuxX.HSA Series Diode Laser
LuxX.HSA ® diode laser modules with fast analogue modulation capability

Key Facts:
• Compact One-Box design
• 31 different wavelengths between 375nm and 1550nm
• Astigmatism correction for perfect focal quality
• Single-Mode optical output powers up to 300mW
• High-Stability CW operation (ACC and APC mode)
• Ultrafast analogue modulation up to 150MHz
• Ultrafast digital modulation >250MHz
• Electronic shutter function (laser inhibit) with >500kHz full ON/OFF capability
• Automatic Aging Compensation (AAC) function
• USB2.0 and RS-232 interface
• 0.7mm beam diameter option
• Industry standard footprint
• Drivers for Metamorph, LabVIEW and Micromanager available

Specifications LuxX.HSA Diode Laser Series

LuxX.HSA® Series
 

Wavelengths & Powers
(other wavelengths and
powers on request)
LuxX.HSA® 375-20 375nm / 20mW
LuxX.HSA® 375-70 375nm / 70mW
LuxX.HSA® 395-120 395nm / 120mW
LuxX.HSA® 405-20 405nm / 20mW
LuxX.HSA® 405-60 405nm / 60mW
LuxX.HSA® 405-120 405nm / 120mW
LuxX.HSA® 405-300  405nm / 300mW 
LuxX.HSA® 415-120 415nm / 120mW
LuxX.HSA® 425-102 425nm / 120mW
LuxX.HSA® 445-50 445nm / 50mW
LuxX.HSA® 445-100  445nm / 100mW 
LuxX.HSA® 445-500 445nm / 500mW 
LuxX.HSA® 457-100 445nm / 100mW
LuxX.HSA® 457-500 457nm / 500mW 
LuxX.HSA® 460-100 460nm / 100mW 
LuxX.HSA® 473-20 473nm / 20mW
LuxX.HSA® 473-80 473nm / 80mW
LuxX.HSA® 473-100 473nm / 100mW
LuxX.HSA® 473-300 473nm / 300mW
LuxX.HSA® 488-25 488nm / 25mW
LuxX.HSA® 488-60 488nm / 60mW
LuxX.HSA® 488-80 488nm / 80mW
LuxX.HSA® 488-100  488nm / 100mW 
LuxX.HSA® 488-150  488nm / 150mW 
LuxX.HSA® 488-200 488nm / 200mW
LuxX.HSA® 488-300 488nm / 300mW
LuxX.HSA® 505-80 505nm / 80mW
LuxX.HSA® 515-25 515nm / 25mW
LuxX.HSA® 515-50 515nm / 50mW
LuxX.HSA® 515-80 515nm / 80mW
LuxX.HSA® 515-100 515nm / 100mW
LuxX.HSA® 515-150 515nm / 150mW
LuxX.HSA® 633-100 633nm / 100mW
LuxX.HSA® 638-40 638nm / 40mW
LuxX.HSA® 638-100 638nm / 100mW
LuxX.HSA® 638-150 638nm / 150mW
LuxX.HSA® 638-200 638nm / 200mW
LuxX.HSA® 642-140 642nm / 140mW
LuxX.HSA® 647-140 647nm / 140mW 
LuxX.HSA® 660-130 660nm / 130mW
LuxX.HSA® 675-200 675nm / 200mW
LuxX.HSA® 685-50 685nm / 50mW
LuxX.HSA® 690-200 690nm / 200mW
LuxX.HSA® 705-40 705nm / 40mW
LuxX.HSA® 730-40 730nm / 40mW
LuxX.HSA® 785-120 785nm / 120mW
LuxX.HSA® 785-200 785nm / 200mW
LuxX.HSA® 808-140 808nm / 140mW
LuxX.HSA® 830-140 830nm / 140mW
LuxX.HSA® 850-100 850nm / 100mW
LuxX.HSA® 945-200 945nm / 200mW
LuxX.HSA® 980-200 980nm / 200mW
LuxX.HSA® 1030-100 1030nm / 100mW
LuxX.HSA® 1060-150 1060nm / 150mW
LuxX.HSA® 1080-80 1080nm / 80mW
LuxX.HSA® 1310-50 1310nm / 50mW
LuxX.HSA® 1550-100 1550nm / 100mW

Beam diameter
(other diameters on request)

1.0 ... 1.5mm (1/e²), (depends on wavelength)

0.7mm (1/e²) +/- 0.1mm with option XX.DSO

Beam quality M²

<1.15    (1.05 typical) 

Astigmatism (corrected)

<0.2*ZR

Beam ellipticity

<1.15:1

Polarisation

>100:1 vertical

Long term power stability

<0.5% / 8h

RMS Noise  20Hz...20MHz

<0.2% (CW)

Operation Modes
    Mode 1
    Mode 2
    Mode 3
    Mode 4
    Mode 5


CW operation (ACC - Automatic Constant Current)
CW operation (APC - Automatic Power Control)
Analogue modulation
Digital modulation
Analogue + Digital modulation

Analogue modulation
Input signal type

up to 150MHz @ -3dB
0...1V (50Ohm)

Digtal modulation
Input signal type

>250MHz
Single-ended input: TTL (200Ohm) or 0...1V (50Ohm) - user configurable
Differential-ended input: PECL / LVDS / HSTL etc. - autom. detected

Laser Enable (electronic shutter)
Input signal type

>500kHz (full ON/OFF)
TTL (2kOhm)

Rise- and falltime

Analogue:        < 5ns
Digital:             < 1.5ns
Laser Enable:  < 100ns 

Extinction ratio

Analogue:       > 1000 : 1
Digital:            >  250 : 1
Laser Enable:  infinite (full ON/OFF)

Supply voltage

12.00 VDC   +/- 0.50 VDC

Control interface

RS-232 and USB 2.0

Dimensions laser head

100 x 40 x 40mm  (l x w x h)

Options & Accessories
LUXXPLUS.PSU world wide power supply unit for LuxX+ and LuxX.HSA series lasers 
XX.DSO collimator objective for 0.7mm (1/e²) beam diameter
LUXXPLUS.CDRH remote control box with key switch and emission LED for CDRH compliant operation
LUXXPLUS.HEATSINK standard heatsink for LuxX+ and LuxX.HSA Series laser heads
XX.FASYADAP Fibre coupling adapter mount for LDM Series fiber coupling units and other fibre coupling systems with 1-inch grid mounting holes
LuxX® Series Diode Lasers

The Omicron LuxX.HSA® Laser series offers high-perfomance at a compact design. A broad variety of wavelengths and single-mode emission up to 300mW cover a wide range of applications. Easy integration into existing or future designs is assured by versatile input signal types. The USB2.0 and the RS-232 interface support deep integration of the lasers into the application´s process.

Applications:

- Flow Cytometry
- Flourescence lifetime measurements
- Confocal Microscopy
- Optogenetics
- Microlithography
- Test and Measurement
- Machine Vision

LuxX.HSA dimensional drawings
Omicron Control Center (OCC) - Laser Control Software

Each LuxX.HSA diode laser module is delivered with the Omicron Control Center (OCC) – Laser Control Software.
The software can control multiple lasers and offers a Master section which controls all lasers in parallel. The OCC can be used for daily use or just for configuring the laser for computer independent operation once.

Contact

Omicron-Laserage Laserprodukte GmbH
Raiffeisenstrasse 5e
63110 Rodgau-Dudenhofen
Germany

Tel:
+49-(0)6106-8224-0
Fax:
+49-(0)6106-8224-10
email:
mail@omicron-laser.de