LightHUB+® Laser Light Engines
LightHUB+® – Plug&Play Laser Light Engines with up to 6 user-upgradable wavelengths
Key Facts:• Up to 6 wavelengths beam-combined and efficiently
fibre coupled in one compact housing
• Over 30 different wavelengths available
• Wavelengths upgradable by the end-user
• Single-mode, polarization maintaining or multi-mode fibre coupling
output
• Passive or active cooling with optional cooling unit
• All lasers with direct analogue and digital modulation
• Windows™ based laser control software included.
• Software drivers for Metamorph, LabVIEW and Micromanager available
LightHUB+® - Specifications: | |
Available models: |
LightHUB+ Laser Light Engine |
available wavelengths and powers: (internal laser power) |
375nm / 20mW, 70mW Restrictions in some wavelenght combinations may apply. |
Fibre coupling: |
Type: Single-mode, (PM) or Multi-mode fibres collimated outputs diameters on customer's demand |
Modulation Capabilities |
Analogue Modulation: up to 1.5MHz Digital Modulation: up to 150kHz (full ON/OFF) |
Control interfaces: |
Type: USB 2.0 / RS-232 Interlock Key-Switch |
Laser control software: |
WindowsTM based laser control software |
Supply voltage: |
12VDC or 90-240VAC, 50/60Hz |
Available options |
LH+.COOL - optional active cooling unit for LightHUB+ |
Mechanical size: |
L x W x H: 402mm x 402 x 97 mm (without cooling unit) |
The LightHUB+® Plug&Play laser light engines can be equipped with up to six DPSS or diode lasers of different wavelengths in a compact and rugged design. Wavelengths between 375nm and 1550nm and optical output powers up to 300mW per laser line are possible. The LightHUB+ can be upgraded by the end-user from 1…6 wavelengths easily. Pre-assembled upgrade-kits consisting of the laser head. optical combiner block and an interface card can be installed at any time. The fiber output can be equipped with Single-Mode, polarization-maintaining fibres or Mult-Mode fibers with various ourput connectors or collimated beam diameters starting from 0.7mm. Six individual Analog and Digital Modulation Inputs as well as a RS-232 and USB Interface allow easy Integration Input control environemts. The system is designed to be both passively or actively cooled. By mounting it on a optical table or thicker breadboard, passive cooling is possible. If the system should be operated in a free-standing desk-top use, the optional active cooling unit with temperature controlled fans can be attached underneath.
Applications:
– Flow Cytometry
– Confocal Microscopy
– Optogenetics
– Test and Measurement
– Machine Vision
LightHUB+ Laser Light Engine
Front view
LightHUB+ Laser Light Engine
Rear view
LightHUB+ Laser Light Engine
Front view with optional cooling unit attached
Recommended for free-standing / desktop use
LightHUB+ Laser Light Engine
Rear view with optional cooling unit attached
Recommended for free-standing / desktop use
Each LightHUB+ laser light engine is delivered with the Omicron Control Center (OCC) – Laser Control Software. The software can control multiple lasers and offers a Master section which controls all lasers in parallel. The OCC can be used for daily use or just for configuring the laser for computer independent operation once.
Downloads
Contact
Omicron-Laserage Laserprodukte GmbH
Raiffeisenstrasse 5e
63110 Rodgau-Dudenhofen
Germany
Tel:
+49-(0)6106-8224-0
Fax:
+49-(0)6106-8224-10
email:
mail@omicron-laser.de