Dual Diode – Two laser diodes, twice the output power

Dual Diode Laser with double output power
High power laser diode module integrating two single-mode laser diodes for double output power

Bluephoton® DualDiode Series – 375 nm – 488 nm
Greenphoton® DualDiode Series – 515 nm
Redphoton® DualDiode Series – 635 nm – 1060 nm

Specifications DualDiode-Models

Available laser models

CWA, CWA.L, 150/500, TA Deepstar®, DC180, PS350, A350


Blue- / Greenphoton® DualDiode

Redphoton® DualDiode

Wavelengths & Powers
(other wavelengths and powers on request)

Single-Mode (SM):
375nm / 140mW
395nm / 240mW
405nm / 600mW
415nm / 240mW
425nm / 240mW
445nm / 200mW
457nm / 200mW
460nm / 200mW
473nm / 160mW
473nm / 200mW
488nm / 300mW
488nm / 400mW
515nm / 100mW
515nm / 160mW
Multi-Mode (MM):
375nm / 400mW (M² <6)
405nm / 2400mW (M² <6)
445nm / 3000mW (M² <6)

Single-Mode (SM):
635nm / 10mW
637nm / 300mW
643nm / 300mW
647nm / 300mW
658nm / 250mW
670nm / 30mW
685nm / 70mW
785nm / 240mW
808nm / 400mW
830nm / 400mW
852nm / 300mW
980nm / 300mW
1016nm / 200mW
1060nm / 200mW
Multi-Mode (MM):
638nm / 500mW

Beam diameter
(other diameters on request)

1.25mm (1/e²) +/- 0.25mm
(MM beam diameter may vary)

1.25mm (1/e²) +/- 0.25mm
(MM beam diameter may vary)

Beam quality M²

<1.2 (SM)
<6 (MM)

<1.2 (SM)
<6 (MM)

Astigmatism (corrected)



Beam ellipticity

<1.1:1 (SM)

<1.1:1 (SM)


cross-polarised 100:100

cross-polarised 100:100


see different laser models


LDM.COL - collimator objective
LDM.FOC - customized focussing objective
LDM.FASY.XXX - fibre coupling unit
LDM.24VPSU - worldwide power supply unit

The diode lasers of the Bluephoton® / Greenphoton® / Redphoton® DualDiode Series are temperature-stabilized lasing diode modules, with two laser diodes of equal wavelength, whose laser beams are united over special co-linear optics. Through this, it is possible to quasi-duplicate the powers of single mode laser diodes available on the market. The only difference to laser diode modules with only one laser diode is that the DualDiode laser diode modules indicate a crossed polarization. All other beam parameters are identical, which means double power with equal quality. For all applications where the power of the single mode or multimode laser diodes available on the market no longer suffices, and linear polarization is not a prerequisite, the DualDiode modules are the correct selection. Many years of application in the printing industry (CtP – Computer-to-Plate), direct silk screen slab illumination (CtS – computer-to-screen) and in quality control, mean that unambiguous market advantages have been provided to the users of this technology, because double power also means double speed. A further advantage of the dual diode system is also the redundancy. If, contrary to expectation, one of the two laser sources should fail, the process can be maintained with the aid of the remaining source. The DualDiode laser diode modules are available in all laser variants as CWA, CWA.L, 150/500, DC180, PS350, A350 and TA Deepstar®. As a result of their intelligent laser controller with interface RS-232, these lasers can be integrated seamlessly into applications and controlled. Through the standardized “Command Line Interface” (CLI), you have at all times full control of all parameters of the laser, such as for example laser diode temperature, laser powers and currents, operating modes and lots more. The systems consist of a laser head, two laser controllers in the EMC-screened modular housing and, according to controller variant, with 24 V DC or 85-245 V AC supply voltage. As in case of all lasers of the Bluephoton® and Redphoton® Series, the laser head can be adapted very simply to customer specifications by the use of the modular principle.


Press Releases

Multiline lasers


Omicron-Laserage Laserprodukte GmbH
Raiffeisenstrasse 5e
63110 Rodgau-Dudenhofen