High Power LED modules with TEC cooling and optional fibre-coupling

LEDMOD LAB Series
LEDMOD V2 Series

TEC-cooled High Power LED modules from 255 nm to 950 nm with optional fibre-coupling

LEDMOD Series - Specifications

LEDMOD V2

Wavelengths & Powers
(other wavelengths and powers on request)

Deep-UV:
255nm / 150µW *
265nm / 400µW *
275nm / 6mW *
280nm / 70mW
310nm / 50mW
340nm / 50mW
UV / Violett:
365nm / 450mW
385nm / 450mW
405nm / 450mW
VIS:
455nm / 450mW
470nm / 450mW
505nm / 100mW
528nm / 100mW
590nm / 100mW
617nm / 450mW
625nm / 450mW
IR:
730nm / 600mW
850nm / 800mW
950nm / 800mW
White:
5600K / 400mW

Free emission angle

120 - 130° (Deep-UV 10°)

Temperature control

active peltier cooling (TEC)

External modulation capabilities

up to 500kHz analogue modulation
up to 500kHz digital modulation

Modulation inputs 

1x Analoge modulation (0...5V / 2.5kOhm) via SMA Connector
1x Digital modulation (TTL / 5kOhm) via SMA Connector

Internal modulation capabilities

Up to 200kHz with programmable frequency
 and duty-cycle

Power setting resolution

internal: 12Bit
external: analogue

 SYNC output

TTL signal via SMA connector 

Computer interface

USB-2.0 and RS-232 

Operation modes

1.) external analogue control (0...5V) for output power and
   additional external TTL signal for ON/OFF modulation

2.) internal power control with external TTL for ON/OFF
   modulation

3.) internal power control CW (continues wave) operation
   (no external signals necessary)

4.) internal power control + programmable frequency and
   duty-cycle for ON/OFF modulation
   (no external signals necessary)

5.) external power control (0...5V) for output power +
   programmable frequency and duty-cycle for ON/OFF
   modulation

Control interface

15-pin HD-Sub-D connector

Dimensions
(without fibre-coupling unit)

 56x52x166mm (HxWxL).

Weight

350g

Supply voltage

11VDC-25VDC

Power consumption

27W max.
<1W in standby

Environmental temperature

0°C-45°C

Certifications

CE, UL/CSA on request

Special features

* Interlock function
* Over-TEMP protection
* Remote-control
* SYNC output

Options

* High-efficiency fibre coupling into high-NA POF
  and fused-silica fibres (e.g. 2mm / 70%, 1mm / 35%)
* Collimating and focussing objectives
* Beam shaping (diffractive and refractive)

* Deep-UV models are not available with fiber coupling option.

The LEDMOD V2 modules offer great functionality and flexibility for applications in industry and research. With more than 40 different wavelengths from deep UV to the near infrared and optical output power of several hundred milliwatts, the so-called “LEDMOD” series can be used in many applications such as microscopy, chemical analysis, spectroscopy, forensics and other areas. The LED modules are available in a fibre-coupled version or with free emission. The modules have modulation inputs for fast analogue intensity modulation with up to 200 kilohertz and digital modulation with a switching time of < 2µs. High-precision temperature stabilization of the LED chips ensures a very good performance and wavelength stability. This is important especially for applications that not only need an exact output power, but also a high stability of the emission spectrum. The digital modulation can be operated via external modulation signals, as well as an internal, programmable signal generator. A SYNC output ensures synchronization with external devices such as cameras, spectrometers and lock-in amplifiers. One or several optional “LEDMOD” modules can be comfortably controlled via RS-232 and USB 2.0 interface by either the supplied software 'Omicron Control Center' or the customer's own software.

- Software driver for Metamorph available

LEDMOD V2 07  LEDMOD V2 05  LEDMOD V2 08
LEDMOD available wavelengths (VISIBLE)

Omicron Control Center (OCC) Software – controlling 3 LEDMOD V2 modules

OCC Software with three LEDMOD´s connected

Each LEDMOD V2 module is delivered with the Omicron Control Center (OCC) – Control Software. The software can control multiple LEDMOD V2 Modules and offers a Master section which controls all modules in parallel. The OCC can be used for daily use or just for configuring the LEDMOD´s for computer independent operation once.

Downloads

LEDMOD.V2 Datasheet

LEDMOD.V2 Datasheet

Contact

Omicron-Laserage Laserprodukte GmbH
Raiffeisenstrasse 5e
63110 Rodgau-Dudenhofen
Germany

Tel:
+49-(0)6106-8224-0
Fax:
+49-(0)6106-8224-10
email:
mail@omicron-laser.de